Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 160)

Chapter 5: Configuration
Narrow Band Radio Setup
132 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
5.10 Narrow Band Radio Setup
Keep in mind that the Narrow Band icon is only visible in the 7530 G2 Control
Panel when a Narrow Band radio is installed in the unit.
• In the Control Panel, tap on the Narrow Band Radio icon.
5.10.1 Info Tab
In the Narrow Band Radio dialog box, the Info tab displays information about the
radio – it cannot be edited.
The Power information in this screen indicates the power of the radio installed in
the unit – 0.5 or 1.0 W. The “Serial Number” is the identifier for the radio and is
used by the protocol when the “Auto Radio Address” parameter is enabled. The
“CIS Data” (Card Information Structure) is manufacturer information describing the
PC Card installed in the 7530 G2. “DSP x.x / FPGA 0xNN” indicates the firmware
revision of the radio’s DSP (x.x) and FPGA (0xNN) where x.x and NN represent
actual revision numbers.
Statistics Screen
• Tap on the Statistics button to display the Protocol Statistics screen.