Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 203)

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 175
Chapter 5: Configuration
Decoded (Intermec ISCP)
Accepted Start Char
This parameter allows the user the option of using one of the two start/stop
characters or both ($ char, * char, $ and * char).
Check Digit Verification
Uses the specified algorithm of the option you've chosen to ensure the integrity of
the symbol data before transmitting. If the data does not contain that algorithm, the
data is not transmitted. The available options are: Disabled, MOD 43 Check, French
CIP, or Italian CIP.
Notes: French CIP (French pharmaceutical) is only used with bar codes contain-
ing 7 characters.
Italian CIP (Italian pharmaceutical) is also known as Code 32. It is trans-
mitted as a standard Code 39 if checksum is not validated.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code
refers to the number of characters (i.e., human readable characters), including
check digit(s).
Field Size/Chars
Refer to page 148 for details.
5.11.4.4 Code 128
Enabled
Setting this parameter to on enables “Code 128”.
EAN 128
To successfully scan this type of bar code, EAN 128 must be enabled. “EAN” bar
codes include group separators and start codes.