Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 68)

Chapter 3: Getting To Know Your 7530 G2
The Keypad Backlight
40 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
To type the letter ‘b’:
• Press the [2] key twice.
• Press [ ⇒] to accept the letter ‘b’.
To type the letter ‘c’:
• Press the [2] key three times.
When you have completed your alpha selections from this key, you can do one of the
following:
• If you want to choose additional alpha characters from another key(s),
leave the [ORANGE] key locked ‘on’, and press the next numeric key that
supports the alpha character you require, or
• If you do not want to choose any additional alpha characters, unlock the
[ORANGE] key, and end alpha selection.
Choosing Multiple Alpha Characters From A Range Of Keys
If you plan on choosing alpha characters from a number of different keys, you are
not required to press the ‘Accept’ [
⇒] key after each alpha selection. The [⇒] key
is only required when you are choosing more than one alpha character from the
same key – e.g., ‘a’, ‘b’ and ‘c’ from the [2] key.
Suppose you want to type the letters ‘a’, ‘d’ and ‘g’. These alpha characters are
accessed from the numeric keys [2], [3] and [4].
• With the [ORANGE] key locked ‘on’, press [2] to type the letter ‘a’.
• Press [3] to type ‘d’, and press [4] to type the letter ‘g’.
• To end alpha selection, unlock the [ORANGE] key.
3.3.6 The Keypad Backlight
Note: This option may be restricted to supervisory use only.
The intensity of the keypad backlight and the conditions under which this
backlight is activated can be tailored in the Keyboard Properties dialog box in
the Control Panel.
Note: Refer to “Keyboard Backlight” on page 92 for details about this option.