Polycom DOC2231A User Manual
Page 29
Advertising
MGC+50/MGC+100 Getting Started Guide
2-17
8.
In the MCUs list, double-click the MCU icon to connect to it.
9.
Modify the IP address of the MCU unit as allocated by the network
administrator. This is the IP address with which the MCU is identified on
the LAN and not its definition in the MGC Manager application:
a.
Right-click the MCU icon, and then click IP Configuration.
The IP Configuration dialog box opens.
b.
The following parameters may be modified:
c.
Click OK.
10. Press the Reset button on the MGC+ unit.
11. Disconnect the MCU from the local network that you have created.
12. Connect the MCU to your site’s network.
Advertising