Polycom DOC2231A - Manual (Page 37)

Chapter 3 - MGC+ Software Installation and Configuration
3-5
Defining the MCU
To manage and control the MGC+ unit it must be added to the MCUs network
list in the MGC Manager application.
To define an MCU Connection:
1. In the Browser pane, right-click the MCUs Network icon, and then click
New MCU.
The Add MCU dialog box opens.
2. In the Name box, enter the name of the MCU. Specify a name that clearly
identifies the MCU.
3. In the IP Address box, enter the IP Address of the MCU.
The MGC unit has to be installed and its IP address properly
configured before defining its connection parameters in the MGC
Manager application. For details, see Chapter 2, “First Entry MGC+
Control Unit (CU) IP Configuration” on page 2-18.
Installing the
MGC Manager
Initial IP
Configuration
Connecting
to an MCU
Configuring the
Network Services
Defining an MCU
Starting the MGC
Manager
The IP address should be identical to the one configured during the Initial IP
Configuration.