Polycom DOC2231A - Manual (Page 31)

MGC+50/MGC+100 Getting Started Guide
2-19
The MCU Properties dialog box opens.
b. Enter the IP address of the MCU as you have defined in the IP
Configuration.
c. Click OK.
14. Connect to the MCU.
Using a Keyboard and Monitor Attached to the MGC+ unit
1. Access the Main Control Module rear I/O panel and connect the
keyboard and the monitor to the appropriate ports.
The current MCU name.
To modify, type a new
name
MCU IP address. Enter
the IP address of the MCU
as allocated by the
network administrator