Planar PD8130 - Manual (Page 57)

Operation
Planar PD8130/PD8150 Installation/Operation Manual 43
PREL
IMINA
RY
Color Saturation: To adjust the overall color intensity, select Color Saturation
from the Main menu. Decrease this setting if colors are overly saturated;
increase it if colors appear muted or washed out.
Color Tint: Tint or “hue” is the ratio of red to green in the color portion of the
image. To adjust the tint, select Color Tint from the Main menu. Decrease this
setting to shift the hue toward red; increase it to shift the hue toward green.
Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To
adjust this, select Sharpness from the Main menu and press ENTER. On your
external test pattern source, select a pattern like the one shown in Figure 4-5.
Figure 4-5. Typical Test Pattern for Adjusting Sharpness
• Sharpness (Simple Mode): Adjust as needed, looking for white edges around
the transitions from black to gray and differently-sized lines in the “sweep”
patterns at the top and bottom. Lower the sharpness setting to eliminate
them.
Brightness and Contrast controls are interactive. A change
to one may require a subtle change to the other in order to
achieve the optimum setting.
Like the Brightness and Contrast controls, the color and tint
controls are interactive. A change to one may require a subtle
change to the other in order to achieve the optimum setting.
Note
Note