Prel imina ry – Planar PD8130 User Manual
Page 94
80
Planar PD8130/PD8150 Installation/Operation Manual
PREL
IMINA
RY
Performance
Microdisplay:
Texas Instruments DLP® 1080p DMD
Native Resolution:
Full HD, 1920 x 1080 (2,073,600 pixels)
Aspect Ratios:
Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3,
4:3 Narrow, Letterbox (Anamorphic lens
compatible)
Projection Lens:
All glass, F/2.5~2.71, f = 39.1~50.1mm, 1.3x manual
zoom, made in Japan
Throw Ratios:
1.85 – 2.40 (distance/width) – Standard lens
1.56 – 1.86 (distance/width) – Optional short-throw
lens
Vertical Lens Shift Range
(Ceiling Mount):
PD8130:
Down = 25% to 60% of screen height below lens
center (50% to 120% of one half of the screen
height)
PD8150:
Up = 25% of screen height above lens center
(50% of one half of the screen height)
Down = 60% of screen height below lens center
(120% of one half of the screen height)
Horizontal Lens Shift Range:
PD8130: None
PD8150: 7.5% of screen width left or right of lens
center (15% of one half of the screen width)
Video Lumens:
1,000 ANSI lumens (maximum) calibrated at D65
Sequential Contrast –
DynamicBlack On:
PD8130: 10,000:1 typical
PD8150: 15,000:1 typical
Cooling Performance:
High efficiency adaptive voltage side-to-side
cooling with low system acoustic noise level and
low light pollution cabinet
Projection Modes:
Front, Rear, Ceiling (front/rear)
Lamp:
User replaceable 180/230W HPM (selectable),
4000 hour lifetime at 180W setting
Video Processing:
Planar customized Gennum GF9450 with 10 bit
independent dual channel image processing,
true 1080i deinterlacing, MPEG artifact reduction
(block and mosquito noise), latest motion
adaptive processing, 3D noise reduction, detail
enhancement, rich color processing and noise
reduction, less than one frame latency
Calibration:
Full RGB gain/offset control (White Balance),
Gamma, Contrast, Color Temperature, Brightness
Table 7-1. PD8130/PD8150 Specifications (continued)