Panasonic KX-FP121 - Manual (Page 23)

23
Setup
Initial Preparation 2 Pull the cassette open lever forward and insert the
paper into the cassette completely.
● The height of the stack of the paper should not
exceed the upper limit on the paper tray,
otherwise the paper may jam or multi-feed.
● The paper should not be over the tab.
● If the paper is not inserted correctly, readjust the
paper or the paper may jam.
Incorrect Correct
Stack of
paper
Paper tray
Note:
● Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or those
used for resumes.
● Do not use different types or thicknesses of paper in the cassette at the same time. This may cause
a paper jam.
● Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated,
damaged or wrinkled.
● Avoid double-sided printing.
● Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper
may jam.
Upper limit
Cassette
open lever
Tab
Adding paper to the cassette
1. Pull the cassette open lever forward and remove
all of the installed paper.
2. Add paper to the removed paper and straighten it.
3. Fan the stack of paper.
4. Pull the cassette open lever forward and insert
the paper into the cassette.
Cassette
open lever