Panasonic KX-FP121 - Manual (Page 80)

80
Receiving Faxes
Pager call
This feature allows your unit to call your pager when your unit receives a fax document and/or incoming
messages.
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “ON”.
● If this feature is not required, select “OFF”.
5 Press .
6 Enter your pager number.
● You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP
Your pager
number
Pauses
Your pager access
code, if required.
NO.=
START/SET/COPY
MODE=ON ▼▲
MODE=OFF ▼▲
START/SET/COPY
PAGER TRANSFER
7 0
1.SYSTEM SET UP
MENU
How your unit and pager work
When your unit receives
a fax document and/or
incoming messages, it will
call your pager company. Your pager
company will
call your pager. A few minutes later, your pager will beep and
display as follows;
— “11” : when your unit received incoming messages.
— “22” : when your unit received a fax document.
If you have subscribed to a Caller ID service and
the Caller ID information (telephone number) is
received, your pager will display the telephone number
before the number “11” or “22”.
Your pager
company
Pager
0 987...
7 Press .
● The unit will dial the stored number.
8 Confirm if the message is displayed on
your pager.
9 Press .
Press to activate the
TAD/FAX mode (p. 84).
AUTO ANSWER
DIGITAL SP-PHONE
PAGER TEST
START/SET/COPY
1 2 3
4 5 6
7 8 9
0
START/SET/COPY
MENU
REDIAL/PAUSE
(Pause)
/
ON
AUTO ANSWER
TAD/FAX ON
DIGITAL SP-PHONE
10