Pelco SPECTRA C3412M-D - Manual (Page 42)

42 C3412M-D (12/08)
ADVANCED CAMERA SETTINGS
SHUTTER SPEED
Shutter speed is the duration of the electronic shutter. Program shutter speed to operate
automatically (Auto) or manually (Numeric Value).
AUTO (default): The electronic shutter speed is set automatically by the amount of light sensed
by the camera.
NUMERIC VALUE: Spectra IV/Spectra IV SE dome systems have several numerical shutter
speed settings. The higher the number, the faster the electronic shutter.
The slowest shutter speed setting is 2 = 1/2 second.
The fastest setting is 30,000 = 1/30,000 second.
Increasing the shutter speed lowers the light sensitivity and reduces the streaking of fast moving
objects.
Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will
eliminate any flicker that may occur in the picture.
AGC LIMIT
AGC limit allows users to adjust how the system balances AGC (automatic gain control) and
electronic shutter in low light conditions. As scene lighting decreases, the system will
automatically adjust, adding a mixture of AGC and slow shutter according to the AGC limit
setting. AGC limit can be set between 0 and 40, with 40 applying maximum AGC before slow
shutter. In contrast, setting AGC limit to 0 will force the system software to apply maximum slow
shutter (as defined by the low light limit setting) before any AGC is applied. The default AGC
settings vary depending on camera model.
Note: The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to
Low Light Limit on page 40).
* This setting applies only to Pressurized Spectra IV dome systems.
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
TYPE OF LIGHTING
AUTO FOCUS
SURE
FOCUS
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
LOW LIGHT FOCUS
AUTO IR LEVEL
<ADVANCED SETTINGS>
BACK
EXIT
CAMERA
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
VIDEO LEVEL
SENSOR SCAN MODE
FIELD ALIGN
E. IMAGE STABILIZER
IMAGE ENHANCEMENT
LOW LUX NOISE REDUCTION
WIDE DYNAMIC RANGE