Pelco SPECTRA C3412M-D - Manual (Page 80)

80 C3412M-D (12/08)
EVENT
An event is a preprogrammed camera, park, scan, preset, pattern, window blanking, alarm, or
auxiliary function that can be performed automatically at a specific date and time.
For example, suppose a camera is set to run in a continuous pattern that scans a parking lot
during business hours Monday through Friday. On Saturday and Sunday the camera needs to stop
running the pattern and observe a gate. First, program a preset to set the camera to observe the
gate. Second, schedule an event to activate the preset on the weekends. Finally, a second,
separate event must be scheduled to end the first event and allow the camera to return to the
pattern on Monday.
Note: Events do not have a selectable duration. A second event must be scheduled to end a
previous event.
Events can be programmed from the Preset, Pattern, Window Blanking, Alarm, or Aux menus, or
they can be programmed from the Event menu. Events are managed individually or as a group
from the Event menu.
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
* This setting applies only to Pressurized Spectra IV dome systems.