Pelco SPECTRA C3412M-D - Manual (Page 75)

C3412M-D (12/08) 75
CLEAR
Use this setting to clear user-defined settings or return the dome to factory default settings.
The following are the available settings:
ALL ZONES: Clears all zones. To clear a single zone, refer to Zones on page 64.
ALL PRESETS: Clears all presets. To clear a single preset, refer to Presets on page 57.
ALL PATTERNS: Clears all patterns. To clear a single pattern, refer to Patterns on page 63.
ALL WINDOW BLANKING: Clears all blanked windows. To clear a single blanked window,
refer to Window Blanking on page 65.
CLEAR ALL EVENTS: Clears all events. To clear a single event, refer to Event on page 80.
RESTORE FACTORY DEFAULTS: Restores all camera settings to factory default settings.
* This setting applies only to Pressurized Spectra IV dome systems.
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
CLEAR ALL EVENTS
RESTORE FACTORY DEFAULTS
BACK
EXIT
CLEAR