Pioneer VSX 920 - Manual (Page 11)

Controls and displays 02
11
En
English
Français
Deutsch
Nederlands
Italiano
Español
Display
1 PHASE
Lights when the Phase Control is switched on
(page 38).
2 AUTO
Lights when the Auto Surround feature is
switched on (see Auto playback on page 35).
3 ST
Lights when a stereo FM broadcast is being
received in auto stereo mode.
4 TUNE
Lights when a normal broadcast channel or
SIRIUS channel is being received.
5 Speaker indicators
Indicates the speaker terminal, A and/or B, to
which audio signal output is currently set
(page 20).
6 Sleep timer indicator
Lights when the receiver is in sleep mode
(page 13).
7 Tuner/SIRIUS preset indicators
PRESET
Shows when a preset radio station is
registered or called.
MEM
Blinks when a radio station is registered.
8 PRESET information or input signal
indicator
Shows the preset number of the tuner or the
input signal type, etc.
9 Character display
Displays various system information.
10 DTS indicators
DTS
Lights when a source with DTS encoded
audio signals is detected.
HD
Lights when a source with DTS-EXPRESS
or DTS-HD encoded audio signals is
detected.
ES
Lights to indicate DTS-ES decoding.
96/24
Lights when a source with DTS 96/24
encoded audio signals is detected.
NEO:6
When one of the NEO:6 modes of the
receiver is on, this lights to indicate NEO:6
processing (page 35).
11 Dolby Digital indicators
2D
Lights when a Dolby Digital encoded signal
is detected.
2D +
Lights when a source with Dolby Digital
Plus encoded audio signals is detected.
1 2 3 4 5 6 7
10 11 12 13 13 15 14
8
9
VSX-920_UCSMXCN_En.book 11 ページ ２０１０年１月２１日 木曜日 午前９時４３分