Pioneer VSX 920 - Manual (Page 77)

Additional information 11
77
En
English
Français
Deutsch
Nederlands
Italiano
Español
USB messages
SIRIUS radio messages
Symptom Cause Action
iPod/USB Error 1
(I/U ERR1) There is a problem with the signal path
from the USB to the receiver. Switch off the receiver and reconnect
the USB to the receiver.
iPod/USB Error 3
(I/U ERR3) When there is no response from the USB. Switch off the receiver and reconnect
the USB to the receiver.
iPod/USB Error 4
(I/U ERR4) The power requirements of the USB
device are too high for this receiver. Switch off the receiver and reconnect
the USB to the receiver.
Symptom Cause Action
Antenna Antenna is not properly connected. Check that the antenna cable is
attached securely.
CHECK SIRIUS TUNER SIRIUS Connect tuner is not properly
connected
Check that the 8 pin mini DIN
cable and AC Adapter are
attached securely.
LINKING The SIRIUS signal is too weak at the
current location. There is no SIRIUS signal
or the SiriusConnect Tuner is connected. n/a
UPDT ***% Unit is updating subscription. Wait until the encryption code
has been updated.
Updating Unit is updating channels. Wait until the encryption code
has been updated.
Invalid Channel Selected channel is not available/does not
exist. Select another channel.
VSX-920_UCSMXCN_En.book 77 ページ ２０１０年１月２１日 木曜日 午前９時４３分