Pioneer VSX 920 - Manual (Page 30)

Connecting your equipment 03
30
En
Connecting to the front panel
video terminal
Front video connections are accessed via the
front panel using the
INPUT SELECTOR or
VIDEO button on the remote control. There are
standard audio/video jacks. Hook them up the
same way you made the rear panel
connections.
• Push down on the PUSH OPEN tab to
access the front video connections.
Plugging in the receiver
Only plug in after you have connected all your
components to this receiver, including the
speakers.
• Plug the AC power cord into a convenient
AC power outlet.
CAUTION
• Handle the power cord by the plug part. Do
not pull out the plug by tugging the cord,
and never touch the power cord when your
hands are wet, as this could cause a short
circuit or electric shock. Do not place the
unit, a piece of furniture, or other object on
the power cord or pinch the cord in any
other way. Never make a knot in the cord or
tie it with other cables. The power cords
should be routed so that they are not likely
to be stepped on. A damaged power cord
can cause a fire or give you an electric
shock. Check the power cord once in a
while. If you find it damaged, ask your
nearest Pioneer authorized independent
service company for a replacement.
• The receiver should be disconnected by
removing the mains plug from the wall
socket when not in regular use, e.g., when
on vacation.
MASTER
VOLUME
MCACC SETUP MIC
VIDEO INPUT
AUDIO L R VIDEO
iPod
iPhone
USB
CONTROL ON / OFF
L VIDEO R
AUDIO/VIDEO OUTPUT
This receiver
Video camera
(etc.)
VSX-920_UCSMXCN_En.book 30 ページ ２０１０年１月２１日 木曜日 午前９時４３分