Pioneer VSX 920 - Manual (Page 44)

The System Setup menu 06
44
En
Chapter 6:
The System Setup menu
Using the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the receiver, and also explains how to fine-tune
individual speaker system settings to your
liking.
1 Switch on the receiver and your TV.
Use the  RECEIVER button to switch on. 1
Switch the TV input so that it connects to the
receiver.
2 Press on the remote control,
then press the SETUP button. 2
An on-screen display (OSD) appears on your
TV. Use
/// and ENTER on the remote
control to navigate through the screens and
select menu items. Press
RETURN to confirm
and exit the current menu.
3 Select the setting you want to adjust.
• Auto MCACC – This is a quick and
effective automatic surround setup (see
Automatically setting up for surround
sound (MCACC) on page 31).
• Manual SP Setup – Specify the size,
number, distance and overall balance of
the speakers you’ve connected (see
Manual speaker setup on page 45).
• Input Assign – Specify what you’ve
connected to the component video inputs
(see The Input Assign menu on page 48).
• Speaker System – Specifies how you are
using the speaker terminals (see The
Speaker System setting on page 49).
• Video Parameter – There are a number of
additional picture settings (see The Video
Parameter setting on page 50).
Note
1 If headphones are connected to the receiver, disconnect them.
2 • You can’t use the System Setup menu when the iPod/USB input is selected.
• Press SETUP at any time to exit the System Setup menu.
BD DVD
INPUT SELECT
SOURCE SLEEP
TV
CONTROL
TV
INPUT
RECEIVER
RECEIVER
ENTER
MUTE
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
iPod CTRL
CATEGORY
BAND
MENU
HOME
MENU
SETUP
DTV/ TV
TOP
MENU
TUNE
TUNE
P R E S E T P R E S E T
RECEIVER
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
Return
VSX-920_UCSMXCN_En.book 44 ページ ２０１０年１月２１日 木曜日 午前９時４３分