Other problems when using the auto mcacc setup, Basic setup 04 – Pioneer VSX 920 User Manual

Page 33

Advertising
background image

Basic Setup

04

33

En

English

Français

Deutsch

Nederlands

Italiano

Español

8

Make sure ‘OK’ is selected, then press

ENTER.
If the screen in step 7 is left untouched for 10
seconds and the

ENTER button is not pressed

in step 8, the Auto MCACC setup will start
automatically as shown below.

A progress report is displayed on-screen while
the receiver outputs more test tones to
determine the optimum receiver settings for
channel level, speaker distance, and Acoustic
Calibration EQ.

Again, try to be as quiet as possible while this
is happening. It may take 1 to 3 minutes.

9

The Auto MCACC Setup has finished!

You return to the System Setup menu.
The settings made in the Auto MCACC Setup
should give you excellent surround sound from
your system, but it is also possible to adjust
these settings manually using the System
Setup menu (starting on page 44).

1

Other problems when using the
Auto MCACC Setup

If the room environment is not optimal for the
Auto MCACC Setup (too much background
noise, echo off the walls, obstacles blocking
the speakers from the microphone) the final
settings may be incorrect. Check for
household appliances (air conditioner, fridge,
fan, etc.), that may be affecting the
environment and switch them off if necessary.
If there are any instructions showing in the
front panel display, please follow them.

• Some older TVs may interfere with the

operation of the microphone. If this seems
to be happening, switch off the TV when
doing the Auto MCACC Setup.

Note

1 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5 inches)

will end up with different size settings. You can correct the setting manually using the Speaker Setting on page 45.
• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be
accurate (taking delay and room characteristics into account) and generally does not need to be changed.

1.Auto MCACC

Now Analyzing

Surround Analyzing
Speaker System
Speaker Distance
Channel Level
Acoustic Cal EQ

Return

VSX-920_UCSMXCN_En.book 33 ページ 2010年1月21日 木曜日 午前9時43分

Advertising