Porsche 911 Carrera User Manual
Page 134
complete” appears after the settings have been
made will the Tire Pressure Monitoring re-learn the
wheels.
Please observe the chapter ”SYSTEM LEARN-
Before fitting tires with sizes which are not stored
in the on-board computer, the missing information
should be supplemented in the on-board computer.
Please consult your authorized Porsche
dealer.
Use only tires approved by Porsche.
The available items in the Tire pressure menu
depend on the equipment of your vehicle. For this
reason it is possible that some of the items shown
here are not available on your on-board computer’s
display.
Load (depending on equipment level)
Push operating lever forward in order to switch
on the selection field.
Select “TPC” with the operating lever.
Push operating lever forward. The display
changes to the Tire pressure menu.
Select “Load” with the operating lever.
Select partial load or full load and push the
operating lever forward.
Please observe the chapter ”TIRE PRESSURES
FOR COLD TIRES” on page 334.
Make sure that the tire pressures correspond
to the on-board computer settings. Correct
the tire pressures if necessary.
132
Controls, Instruments