Porsche 911 Carrera - Manual (Page 48)

Multi-Functional Steering Wheel
Function
Warning!
There is a danger of accident if you set or
operate the on-board computer, radio,
navigation system, telephone or other
equipment when driving. Operating these
devices while driving could distract you from
trafc and cause you to lose control of the
vehicle.
Operate these components while driving only if
the traffic situation allows you to do so safely.
Carry out any complicated operating or setting
procedures only while the vehicle is stationary.
Depending on the equipment in your vehicle, you
can use the function keys of the multi-functional
steering wheel to operate the following Porsche
communication systems:
–
PCM
– Telephone
– CD changer
Readiness for operation of
multi-functional steering wheel
The multi-functional steering wheel is ready for
operation when the ignition and PCM are switched
on.
Operating the function keys
Please read the separate PCM operating
instructions before operating the function
keys.
The rotary knobs at the top left and right of the
steering wheel can also be pressed.
Turn volume control
Upwards - increase volume.
Downwards - decrease volume.
Press volume control
To switch volume/mute on and off.
Turn rotary knob
To select/mark function in the PCM within
a menu. To do this, turn the rotary knob
upward or downward.
Press rotary knob
To activate selected function.
Press screen button
To call the stored PCM function.
The button can be assigned the desired
function in the PCM.
Press Back button
To move back in the PCM menu.
Press Handset Pickup button
To accept a telphone call.
Press Handset Hangup button
To end or refuse a telephone call.
46
Controls, Instruments