Windshield wiper / washer lever – Porsche 911 Carrera User Manual

Page 159

Advertising
background image

Windshield Wiper / Washer Lever

General information

Warning!

Danger of injury when the windshield wipers

operate unintentionally, e.g. in rain sensor

operation. Risk of damage to the windshield

and wiper system.

Avoid running the wiper blades over a dry

windshield to prevent scratching the glass.

Spray washer fluid on the windshield first. A

scratched windshield will reduce visibility.
Always loosen wiper blades from frozen glass

before operating wipers to prevent damage to

the wiper motor or blades.
Always switch off windshield wipers in car

wash to prevent them wiping unintentionally

(intermittent or sensor operation).
Always switch off windshield wipers before

cleaning the windshield to avoid unintentional

operation (intermittent or sensor operation).
Do not operate the headlight washer in car

washes.
Do not operate headlight washer when it is

frozen.

Front wiper and headlight washer system

0 – Windshield wipers off
1 – Rain sensor operation for front windshield

wipers

Move wiper lever upwards to the first click.

2 – Windshield wipers slow

Move wiper lever upwards to the second click.

3 – Windshield wipers fast

Move wiper lever upwards to the third click.

4 – Front windshield wiper - one-touch opera-

tion:

Move wiper lever downwards. The front

windshield wipers wipe once.

5 – Windshield wipers and washer system:

Pull wiper lever towards the steering wheel.

The washer system sprays and wipes while

the lever is pulled towards the steering wheel.

When the wiper lever is released, a few drying

wipes are executed.

A - Headlight washer

Vehicles with Bi-Xenon headlights
The washer sprays only while low beam or high

beam is switched on.

Briefly push button A to operate headlight

washer system.
If heavily soiled, repeat wash.

The headlight washer system automatically sprays

once for every ten times the front windshield

washer system is operated.
Note
The windshield washer nozzles are heated when

the ignition is on, as a precaution against freezing.

Controls, Instruments

157

Advertising