Panasonic SA-XR700 - Manual (Page 13)

13
RQT8743
Control with HDMI (HDAVI Control ™ )
• Only this unit turns off when you shut it down. Other connected equipment compatible with HDAVI Control stay on.
• Audio output automatically switches to speakers on your TV (VIERA) when you turn the unit off.
Audio output from the DVD recorder (DIGA) switches from speakers on the TV (VIERA) to speakers connected to the unit when you
turn the unit on.
• This unit goes from off to on, and speakers connected to this unit start making audio output when you set the TV (VIERA) to output
sounds from the unit.
• This unit automatically goes off when you switch your TV (VIERA) off. (This operation is unavailable when you set the input source as
“ TUNER ” or “CD ” on this unit.)
• (For Australia and New Zealand) Only this unit turns off when you shut it down. Other connected equipment compatible with HDAVI
Control stay on.
• The input for the unit switches automatically to “ DVR ” when a source is played back on the DVD recorder.
• When pictures arrive after sounds, select “ ON ” in “Adjusting audio timing to video timing” (á page 36).
• To set the unit against HDAVI Control, see page 35.
Enjoying sounds from the TV
The input source for the unit switches to “ TV/STB ” when you select a TV channel or operate the TV in other ways (á page 41).
What is HDAVI Control?
HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or DVD recorder
(DIGA) under HDAVI Control. You can use this function by connecting the equipment with the HDMI cable. See the operating
instructions for connected equipment for operational details.
1 Connect the unit to a Panasonic TV
(VIERA) and DVD recorder (DIGA) under
HDAVI Control using the HDMI cable.
(It is recommended that you use Panasonic’s
HDMI cable. Non-HDMI-compliant cables
cannot be utilized.)
2 Make settings in the menu for the TV
(VIERA) to activate linked HDAVI Control
operations.
3 Perform the following steps to make sure
the unit accurately identifies connected
equipment.
1) Turn all equipment on.
2) Switch the TV (VIERA) off and then put it
back on.
3) Switch the unit’s input to “DVR ” and make
sure the TV (VIERA) correctly shows
pictures.
(Take these steps after changing connections
or settings.)
.
Enjoying the Home Theater through one-touch operations
Aim the remote control at the DVD recorder (DIGA) and press
The following operations are automatically performed when you just press [ONE TOUCH PLAY].
1 The DVD recorder goes on and starts playing back the recorded media in the selected drive (e.g.
HDD, DVD).
2 The TV goes on and the TV input changes.
3 Surround playback starts after the unit is turned on and the input source for the unit switches to
“ DVR ”.
To adjust the volume: Press
You can also adjust the volume on your TV (VIERA)’s remote control.
(A message informing the action appears on your TV while you adjust the volume.)
• Press [u SKIP] to start playing a DVD disc or a recorded TV program again when playback does
not start from the beginning.
VIDEO
CD DVD 6CH IN SUBWOOFER BD/DVD/ VCR TV/STB
AUDIO
(BD/DVD PLAYER) IN OUT
OUT OUT IN IN
IN IN IN OUT SUBWOOFER SURROUND FRONT
IN IN IN IN IN
TV/STB VCR DVD RECORDER
DVD RECORDER
DVD RECORDER TV MONITOR TV MONITOR TV/STB
CENTER
BD/
DVD PLAYER
BD/
DVD PLAYER
(DVD RECORDER) IN
R
L
S VIDEO
IN
A OR B
TV (VIERA)
DVD recorder
(DIGA)
HDMI
(AV OUT)
HDMI
(AV IN)
Rear panel
AUDIO
OUT (L)
(R)
You need a stereo phono cable for enjoying
TV with surround sound.
ONE
TOUCH PLAY
DI
RE
CT
NA
VI
GA
TO
R
TO
P
M
EN
U
FU
NC
TIO
N
S
0
CH
VOLUME
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT MANUAL SKIP
ENTER
-/- - DISC
DIRECT
TUNING
ONE T
OUCH PLAY
VOLUME
Note
Cont
rol
wit
h
HDMI
(HDAVI
Cont
rol
TM
)
ENGLISH
Quic
k guide
SA_XR700_EG_GN_ (RQT8743_B)ver.3.fm 13 ページ ２００６年８月３１日 木曜日 午前９時７分