Panasonic SA-XR700 - Manual (Page 44)

44
RQT8743
Remote controlling a TV or DVD recorder etc.
Two or more Panasonic audio equipment
may start functioning when you operate
the unit using the supplied remote control.
Set the unit’s remote control mode to
“
REMOTE 2 ” in such cases.
Do the following to set the same number
(2) as the remote control code.
Using two or more Panasonic equipment (a
mini component system, an AV amp etc.)
Operation on the unit
1 Press and hold [-MENU/
–SETUP, RETURN] for about
2 seconds to enter the SETUP.
2 Select and confirm the choice.
3 Select and confirm the choice.
4 Select and finish the setting.
Operation on the remote control
5 Press
6 Press and
simultaneously and hold
them in the position for
about 2 seconds.
When you return the remote
control code to “1 ”
• Operation on the unit: select “ 1 ” in step 3.
• Operation on the remote control: in step
6, press [ENTER] and [1] simultaneously
and hold them in the position for about 2
seconds.
-MENU/-SETUP ENTER
INPUT SELECTOR
BI-AMP SURROUND
SURROUND SPEAKERS
AUTO DETECTOR
ADVANCED DUAL AMP
RETURN
SURROUND SPEAKERS ENTER - MENU/ - SETUP
AUTO DETECTOR RETURN
INPUT SELECTOR
INPUT SELECTOR
- MENU/ - SETUP ENTER
RETURN
ENTER
- MENU/ - SETUP
RETURN
Basic operation
Turn to select.
Press to confirm
your choice.
To return to the
previous display/
To cancel
TUNER
BAND
ENTER
• Note that this remote control cannot
operate some equipment and that it may
not be able to perform some operations.
• Re-enter the codes after you change the
batteries.
Entering a code to operate other equipment
This remote control can operate Panasonic and Technics audio-visual equipment that
has remote control sensors. You may need to change the remote control code.
It can also operate some other brands of TVs, VCRs, and DVD players. Check the table
for the brand and enter the code as follows.
Changing the codes
The remote control outputs the on/off signal.
If the code is correct, the equipment
turns on or off.
If it doesn’t, try entering another code.
VCR TV
BD/DVD
PLAYER
ANALOG 6CH
0
TV VCR DVD player
Press and hold the button
corresponding to the equipment.
0
Enter the first digit.
Enter the second digit.
Code table
TV VCR
DVD
player
PANASONIC 01/29/30/31 01/29/30 01
AKAI 07/11/28/36/37 06/08/16/17/
19/37
–
ALBA 05/11/12 02/06/23 –
BAIRD – 08/10/37 –
BAUR 32 – –
BLAUPUNKT 28/36 01/26/29/30/
33 –
BRANDT 26/41 – –
BUSH 02/05/10/11/12/
32/38 02/09/23 –
DAEWOO 11/12/32 15 –
DENON – – 01/17
DUAL 32 – –
FERGUSON 11/12 31 02
FINLUX 11/12/22/23/24/
25/40 – –
FISHER 37 05/07/10/11/
12 –
FUNAI 02/38 – –
GOLDSTAR 11/12 – –
GOLDSTAR/LG – 03/04/36/37 –
GOODMANS 11/12/25/32 02/03/18/23/
27/33 –
GO-VIDEO – – 12
GRUNDIG 28/36 02/23/26/28/
32/33 –
HCM – 02/23 –
HITACHI 01/09/26/41 13/14 11
ICE 21/39 – –
INNO HIT 34 – –
ITT – 08/10/11/37 –
ITT/NOKIA 05/07/37 18/27/37 –
JVC 18 20/21 09
KENDO 40 08/09/37 –
KENWOOD – – 15
LOEWE 14/33 03/32 –
LOEWE OPTA 32 – –
LUXOR 37 08/10/11/17/
19/37 –
MATSUI 02/05/06/07/10/
11/12/25/37/38 03/05/09 –
METZ – 01 –
MITSUBISHI 14/19/28/36 17/19/21/32 06
NEC – 04/21/36/37 –
NOKIA 05/07/37 08/10/11/18/
22/27/37 –
NORDMENDE 26/41 20/21 02
OCEANIC 27/35 – –
OKANO – 06 –
ORION 02/03/05/10/11/
12/38 05/09 –
PHILIPS 11/12/13/15 22/32/33/34/
35 04/16
PHONOLA 11/12 32 –
PIONEER – – 03
POLKAUDIO – – 16
RADIOLA 11/12 – –
RAITE – – 13
RCA – – 02
RFT – 33 –
ROADSTAR 39 02/03/18/23/
27 –
SABA 26/41 21 02
SALORA 07/37 08/11/17/19/
37 –
SAMPO – – 14
SAMSUNG 11/12/15/21/25/
34/39 15/16/18/27 10
SANYO 07/17/25/37 07/10/11 –
SCHAUB
LORENZ
– 10 –
SCHNEIDER 11/12 02/03/18/23/
27/32 –
SEG 39/40 02/18/23/27 –
SELECO 11/24 – –
SHARP 17/20 22 08
SIEMENS 11/12/17/28/36 03/10/11/32 –
SINUDYNE 02/05/11/12/22/
24/38/40 – –
SONY 16 24/25/26 05
TECHNICS – – 01
THOMSON 05/26/41 21 02
THORN 06/08/11/12/14/
16/25/32 10 –
TOSHIBA 03/04/06/08 15/17/19/32 04
UNIVERSUM 39 03/08/32/37 –
WHITE WESTIN
HOUSE
11/12/22/40 – –
YAMAHA – – 01
ZENITH – – 07/12
Remote controlling a TV
or DVD recorder etc.
ENGLISH
SA_XR700_EG_GN_ (RQT8743_B)ver.3.fm 44 ページ ２００６年８月３１日 木曜日 午前９時７分