Panasonic SA-XR700 - Manual (Page 20)

20
RQT8743
Connections
See pages 8 and 9 for placing and connecting your speakers according to their number.
Bi-wire speakers have separate connection terminals for high frequency and low frequency signals.
• Bi-wiring prevents high frequency and low frequency signals from interfering with each other. It offers playback in high audio quality.
• HF and LF stand for high frequency and low frequency, respectively.
• Make sure to select “
YES ” in “Making bi-wire setting” (below) when you connect the unit to bi-wire speakers. The speakers do not
produce adequate sounds unless you make this setting.
• Make sure to connect speakers’ HF terminals with the unit’s FRONT B terminals, and speakers’ LF terminals with the unit’s FRONT A terminals.
• Different amps for high frequency and low frequency signals produce BI-AMP stereo sounds that are clearer and higher in audio
quality when you play on 2 channels sources containing analogue audio and 2-channel PCM signals (á page 25).
See “Making BI-AMP settings” (á page 34) for detailed settings.
Make the following connections when you wish to install a second pair of speakers in another room and enjoy music there.
• “Auto speaker setup using the setup microphone” (á page 22) is unavailable for speakers connected to the FRONT B terminals.
• Select “SPEAKERS B” when you wish to enjoy sounds from speakers connected to the FRONT B terminals (á page 25).
• If you select “SPEAKERS B” only, playback is 2-channel stereo. When a surround source is played, the sounds intended for all the
speakers are played through the front left and front right speakers ( 2CH MIX).
Connecting speakers
To connect bi-wire speakers
Making bi-wire setting
1 Press and hold [-MENU/–SETUP, RETURN] for
about 2 seconds to enter the SETUP.
2 Select and confirm the choice.
3 Select and confirm the choice.
YES : When bi-wire speakers are connected
NO : When bi-wire speakers are not connected
Factory setting:
NO
4 Select and finish the setting.
To connect a second pair of front speakers
VIDEO
6CH IN SUBWOOFER VCR TV/STB
FRONT A FRONT B CENTER SURROUND SURROUND BACK
Y
TV MONITOR OUT TV / STB IN DVD RECORDER IN
PB PR
COMPONENT VIDEO
Y Y PB PR PB PR
AC IN
R L R L R L R L BI-WIRE LF HF
AUDIO
IN IN IN OUT FRONT
IN IN IN IN
TV/STB VCR DVD RECORDER
DVD RECORDER
BD/ DVD PLAYER
DER) IN
(6-16 Ω EACH SPEAKER) A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER)
SPEAKERS
HF HF
LF LF Speaker cable
Speaker impedance
BI-WIRE:
4 to 16 Ω
Rear panel
Front speaker (L)
Rear view Front speaker (R)
Rear view
Note
-MENU/-SETUP ENTER
INPUT SELECTOR
BI-AMP SURROUND
SURROUND SPEAKERS
AUTO DETECTOR
TUNE
ADVANCED DUAL AMP
RETURN
SURROUND SPEAKERS ENTER - MENU/ - SETUP
AUTO DETECTOR RETURN TUNE
INPUT SELECTOR
INPUT SELECTOR
ENTER
- MENU/ - SETUP
RETURN
- MENU/ - SETUP ENTER
RETURN
Turn to select.
Press to
confirm your
choice.
To return to
the previous
display/
To cancel
Basic operation
Note
VIDEO
VD 6CH IN SUBWOOFER VCR TV/STB
FRONT A FRONT B CENTER SURROUND SURROUND BACK
Y
TV MONITOR OUT TV / STB IN DVD RECORDER IN
PB PR
COMPONENT VIDEO
Y Y PB PR PB PR
AC IN
R L R L R L R L BI-WIRE LF HF
AUDIO
IN IN IN OUT ND FRONT
IN IN IN IN
TV/STB VCR DVD RECORDER
DVD RECORDER
OR BD/ DVD PLAYER
CORDER) IN
(6-16 Ω EACH SPEAKER) A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER)
SPEAKERS
Speaker cable
Rear panel
Front speaker (R) Front speaker (L)
Speaker impedance
Front A and B: 6 to 16 Ω
Front B:
4 to 16 Ω
Note
Connections
ENGLISH
SA_XR700_EG_GN_ (RQT8743_B)ver.3.fm 20 ページ ２００６年８月３１日 木曜日 午前９時７分