Paradyne IP DSLAM GranDSLAM 4200 User Manual

Page 21

Advertising
background image

1. Installation

4200-A2-GN20-40

January 2004

1-11

6. Install two wood screws (not provided) at the same height above the floor and

18.75 inches (476.25 mm) apart. Do not completely tighten the screws. Leave
them so their heads are about 1/4 inch (6 mm) from the wall.

7. Hang the unit from the wood screws to verify that the screws are properly

placed. The screws should freely slide into the top of the key slots in the
brackets.

8. Do not fasten the unit to the wall until after it is completely cabled and tested.

Proceed to

Installing the Uplink Module

on page 1-13.

02-17254

18.75 in (476.25 mm)

Advertising