Paradyne IP DSLAM GranDSLAM 4200 - Manual (Page 35)

2. Cabling
4200-A2-GN20-40 January 2004 2-11
Procedure
To connect a modem to the CONSOLE port:
1. Determine and procure the proper DCE cable type. The CONSOLE port
requires a DB9 plug connector. The other connector depends on the serial
port on your modem, but normally a DB25 plug is required.
2. Connect the DB9 plug connector to the CONSOLE port socket.
3. If the modem will be permanently connected, fasten the connector to the
Management Module with its captive screws. If the GranDSLAM 4200 is in a
rack, dress the cable to the left and attach it to the rail with a cable tie.
4. Connect the other end of the cable to the serial port of your modem.
02-17279
TST LINE
ALM PWR
ETHERNET
Serial Port
Modem
1
12
13
24
4 8
16 20
POWER
A
ALARM
RTN -48V
DC
BITS
MGMT
CONSOLE
ST ATUS UPLINK
ALRM TEST
B
A
3.5 A 60
B
E1 MODULE
4202 TX
RX
120W
75W
CONSOLE
Port