Pentax K200D - Manual (Page 103)

101
Shooting Functions
4
Set Exposure Steps in [1. EV Steps] in the [
A Custom Setting] menu to
increments of 1/2 EV or 1/3 EV.
AE Lock is a function that memorizes the exposure prior to taking the
picture. Use this when the subject is too small or backlit and a proper
exposure setting cannot be obtained.
1
Press the
L button.
The camera memorizes the exposure
(brightness) at that instant.
Press it again to unlock.
Changing the Exposure Steps
Recording the Exposure Before Shooting (AE Lock)
•
@ is displayed in the viewfinder while the AE lock is engaged. (p.27)
• The exposure remains locked as long as the
L button is kept pressed or
the shutter release button is kept pressed halfway. The exposure remains in
memory for a period between 0.5× to 2× the metering timer after releasing
the
L button.
• You will hear a beep when the
L button is pressed. The beep can be
turned off. (p.204)
• AE lock is not available when the exposure mode is
p (Bulb) mode.
• The combination of shutter speed and aperture value changes depending on
the zooming position even while the AE lock is engaged when using a zoom
lens for which the maximum aperture varies depending on the focal length.
However, the exposure value does not change and the picture is taken at the
brightness level set by the AE lock.
• Exposure can be locked when focus is locked. Set in [4. L with AF
locked] in the [
A Custom Setting] menu. (p.108)
1. E V S t e p s
E x p o s u r e s e t t i n g s t e p s
a r e s e t t o 1 / 2 E V
1 / 2 E V S t e p s
1 / 3 E V S t e p s