Pentax K200D - Manual (Page 93)

91
Shooting Functions
4
• Turn the e-dial while pressing the
mc button to change the EV
compensation value. (p.100)
• Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [
A Custom Setting] menu. (p.101)
• You can automatically correct the sensitivity if appropriate exposure cannot
be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.83)
• When using a lens with an aperture ring,
set the aperture to the
s position while
holding down the auto-lock button on the
lens.
Exposure Warning
If the subject is too bright or too dark,
the aperture value will blink in the
viewfinder and on the LCD panel. If the
subject is too bright, choose a faster
shutter speed. If it is too dark, choose a slower shutter speed. When
the aperture value indication stops blinking, you can take the picture
with proper exposure.
Use an ND (Neutral Density) filter if the subject is too bright. Use a
flash if it is too dark.