Pentax K200D - Manual (Page 95)

93
Shooting Functions
4
• Turn the e-dial while pressing the
mc button to change the EV
compensation value. (p.100)
• Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [
A Custom Setting] menu. (p.101)
• You can automatically correct the sensitivity if appropriate exposure cannot
be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.83)
• When using a lens with an aperture ring,
set the aperture to the
s position while
holding down the auto-lock button on the
lens.
Exposure Warning
If the subject is too bright or too dark,
the shutter speed will blink in the
viewfinder and on the LCD panel. If the
subject is too bright, set the aperture smaller (larger number), and
when too dark, open the aperture further (smaller number). Once
blinking stops, you can take the picture with the proper exposure.
Use an ND (Neutral Density) filter if the subject is too bright. Use a
flash if it is too dark.