Pentax K200D - Manual (Page 45)

43
Getting Started
2
Choose the number of pixels (size) and quality level (JPEG data
compression rate) of pictures according to how you intend to use the
pictures you have taken.
Pictures with larger recorded pixels or more
Es are clearer when printed.
The number of pictures that can be taken (the number of pictures that can
be recorded on an SD Memory Card) decreases with larger file sizes.
The quality of the captured photo or printed picture depends on the quality
level, exposure control, resolution of the printer and a variety of other
factors so you do not need to select more than the required number of
pixels. For example, to print in postcard size,
i (1824×1216) is
adequate. Set the appropriate recorded size and quality level depending
on purpose.
Choose the appropriate number of recorded pixels and quality level for
JPEG images on the [
A Rec. Mode] menu.
1 Setting the JPEG Recorded Pixels (p.146)
1 Setting the JPEG Quality Level (p.147)
JPEG Recorded Pixels, JPEG Quality and Approximate Image
Storage Capacity
• The above table shows the approximate image storage capacity when using a 1
GB SD Memory Card.
• The above figures may vary depending on the subject, shooting conditions,
shooting mode and SD Memory Card, etc.
Recorded Pixels and Quality Level
When the File Format is JPEG
JPEG Quality
JPEG Rec. Pixels
C
Best
D
Better
E
Good
J (3872×2592) 202 343 586
P (3008×2000) 335 570 974
i (1824×1216) 902 1549 2627
When the number of storable images exceeds 500, captured images are
divided into folders of 500 images each. However, in Auto Bracket shooting,
images will be stored in the same folder until shooting is completed, even if the
number of images exceeds 500.