Pentax K200D - Manual (Page 157)

155
Shooting Settings
6
5
Press the
4 button.
The camera returns to the [White Balance] screen.
6
Press the
4 button.
The camera is ready to take a picture with the set White Balance.
You can set the color space to use. The default setting is [sRGB].
Set [Color Space] in the [
A Rec. Mode] menu (p.74).
• If [7. Adjust White Balance] in the [
A Custom Setting] menu is set to [Off] after
White Balance is adjusted, the adjusted values become invalid. Set [7. Adjust
White Balance] to [On] again to enable the values used previously.
• White Balance can also be manually measured in the [Adjust White Balance]
screen.
Setting the Color Space
1 sRGB Sets to sRGB color space.
2 AdobeRGB Sets to AdobeRGB color space.
File names differ depending on the color space setting as shown below.
For sRGB
: IMGPxxxx.JPG
For AdobeRGB : _IGPxxxx.JPG
[xxxx] indicates the file number. This is displayed as a four-digit sequential
number. (p.213)
MENU
AdobeRGB
sRGB
PEF
R e c . M o d e
C o l o r S p a c e
I n p u t F o c a l L e n g t h
M e m o r y
R AW f i l e f o r m a t
R AW b u t t o n
C a n c e l O K OK