Pentax K200D - Manual (Page 97)

95
Shooting Functions
4
The shutter speed and aperture
value are displayed in the viewfinder
and on the LCD panel. Of the
shutter speed and aperture value,
the value being adjusted is
underlined in the viewfinder. While
adjusting the shutter speed or
aperture value, the difference from
the appropriate exposure (EV value)
appears in the viewfinder. The
appropriate exposure is set when
[0.0] is displayed.
• When the sensitivity is set to [AUTO] and exposure mode is set to a
(Manual) mode, the sensitivity is set to a value equivalent to ISO 100 if the
Dynamic Range is set to [Off] and ISO 200 if set to [On].
• Set the shutter speed and aperture values in increments of 1/2 EV or 1/3 EV.
Set in [1. EV Steps] in the [
A Custom Setting] menu. (p.101)
• When using a lens with an aperture ring,
set the aperture to the
s position while
holding down the auto-lock button on the
lens.
Difference from the
appropriate exposure
Exposure Warning
While adjusting the shutter speed or
aperture value, the difference from the
appropriate exposure blinks when it
becomes larger than ±3.0.