Premier PHP HWC-260 User Manual
Page 2
Premier Heat Pumps – Water Heater and Chiller Manual
Page 2
Essential Notes on Acceptance and Installation
of the Premier Heat Pumps (PHP) Water Heater
and Chiller
1) Delivery: After removing the transport packaging please check
the PHP Water Heater for any possible damage attributable to
shipping. Any degradation related to transport should be
advised within 48 hours.
2) Important: Please fully read the installation instructions prior to
installation. Installation should only be carried out by suitably
qualified electrician and/or authorised installer. These
instructions should be retained for future reference.
3) Standards of Installation: The installation must be carried out
in accordance with the applicable local safety and installation
standards. The installation must be in accordance with the
manufacturer’s installation instructions; a person qualified in the
installation of Premier Heat Pump Hot Water Cylinders.
Incorrect installation can cause injury to persons or damage to
the unit. The supplier cannot be responsible for incorrect
installation or any resulting damage or injury.
4) Intended Operation: This heat pump is intended to be used as
a domestic hot water cylinder. Any other use or application will
void the warranty.
5) Breakdown: In the unlikely event of failure, contact the installer.
There are no operator serviceable parts and all repairs should
be undertaken by a refrigeration engineer or other authorised
technician.
6) Resale: In the event of resale to a third party, it is imperative
that all manuals and warning and cautions be made available to
the new owner.