Panasonic KX-FC195AL - Manual (Page 17)

1. Introduction and Installation
15
3 Open the back cover ( 1).
4 Insert the blue core of the front ink film roll
(
1) into the right slot of the unit (2). Insert
the gear with the blue core ( 3) into the left
slot of the unit (
4). Insert the rear ink film roll
( 5).
L
The ink film is safe to touch, and will not
rub off on your hands like carbon paper.
5 Turn the gear with the blue core ( 1) in the
direction of the arrow.
L Make sure that the ink film is wrapped
around the blue core (
2) at least once.
6 First close the back cover securely ( 1) by
pushing down on the dotted area at both
ends (
2). Then close the front cover
securely ( 3).
1.8.2 Replacing the ink film
The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 11 for accessory information.
L We cannot be responsible for any damage to
the unit or degradation of print quality which
1
2
3
4
5
1
1
Slack/Crease
Reverse
Correct
Incorrect
Tight
1 turn
The ink film is not wrapped
around the blue core.
2
2
1
3
FC195AL.book Page 15 Tuesday, November 18, 2003 10:28 AM