Panasonic KX-FC195AL - Manual (Page 54)

8. Programmable Features
52
Code #06: Changing the ring setting in
TAD/FAX mode
TAD RING COUNT
RINGS=2 [ ±]
To change the number of rings before the unit
answers a call in TAD/FAX mode. You can select
“
2” (default), “3”, “4”, “5”, “6”, “7”, “8”, “9”, “TOLL
SAVER” or “RINGER OFF”. See page 40 for
details.
L Set feature #77 to “ TAD/FAX” (page 55)
beforehand.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2 [ ±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “
2” (default), “3”, “4”, “5”, “6”, “7”,
“ 8” or “9”.
L
Set feature #77 to “ FAX ONLY” (page 55)
beforehand.
Code #10: Changing the maximum incoming
message recording time
RECORDING TIME
=VOX [ ±]
“ VOX” (default): Unlimited.
“ 1-9 MIN”: 1 minute to 9 minutes.
Code #11: Setting the remote operation ID
REMOTE TAD ID
=ON [ ±]
1. Press {MENU}.
2. Press {<} or {>} repeatedly to select this
feature.
3. Press {A} or {B} repeatedly to select “ ON”.
4. Press {SET}.
5. Enter any 3-digit number except a number
using 0 or 7.
L The default ID is “ 222”.
6. Press {SET}.
7. Press {MENU}.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A [ ±]
You can select “ A” (default), “B” or “C”.
Code #19: Setting the clock entry/display
CLOCK DISPLAY
=12H [ ±]
This feature changes the clock format for when
the line is indicated in printed reports and lists, or
displayed on the base unit.
“
12H” (default): 12 hour clock
“ 24H”: 24 hour clock
8.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON [ ±]
“ ON” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 36).
“
OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=OFF [ ±]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
L This feature is not available for broadcast
transmission.
L The calling charge may be higher as the
transmission speed is slowed down.
“ ON”: After transmission, this feature will turn off
automatically.
“
OFF” (default): Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF [ ±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. Press {MENU}.
3. Press {#} then {2}{5}.
4. Press {A} or {B} repeatedly to select “ ON”.
5. Press {SET}.
6. Enter the fax number.
7. Press {SET}.
FC195AL.book Page 52 Tuesday, November 18, 2003 10:28 AM