5 adjusting base unit volume, Adjusting base unit volume, 5 adjusting base unit volume – Panasonic KX-FC195AL User Manual

Page 24: 2 handset receiver volume, 1 ringer volume, 2 speaker volume, 3 fax voice guidance volume, 4 answering device volume

Advertising
background image

2. Preparation

22

Note:

L

When the ringer volume is set to off, the
following will be displayed.

Ringer pattern

L

You can select one of 20 ringer patterns for
external calls, internal calls, paging and
alarm (page 56).

2.4.2 Handset receiver volume

3 levels (high/medium/low) are available.
While talking, press {e} or {v}.
The default setting is medium.

2.5 Adjusting base unit
volume

2.5.1 Ringer volume

4 levels (high/medium/low/off) are available.
While the unit is idle, press {A} or {B}.
The default setting is off.

L

If any documents are in the document
entrance, you cannot adjust the ringer
volume. Confirm that there are no documents
in the entrance.

L

To turn the ringer off, press {B} repeatedly
until “

RINGER OFF= OK?” is displayed, then

press {SET}.

Ringer pattern

L

You can select one of three ringer patterns for
external calls (feature #17, page 52).

2.5.2 Speaker volume

8 levels (high to low) are available.
While using the speakerphone, press {A} or
{B}

.

2.5.3 Fax voice guidance volume

9 levels (high to off) are available.
While listening to fax voice guidance, press
{A}

or {B}.

2.5.4 Answering device volume

9 levels (high to off) are available.
While listening to recorded messages, press
{A}

or {B}.

{

SET}

{A}{B}

FC195AL.book Page 22 Tuesday, November 18, 2003 10:28 AM

Advertising