Pioneer DVR-220 - Manual (Page 40)

Playback 05
40
En
1 During playback, select ‘A-B Repeat’ from the
Play Mode menu.
2 With ‘A (Loop Start)’ highlighted, press ENTER at
the point you want the loop to start.
After setting the loop start point, the highlight will
automatically move down to
B(Loop End) .
3 With ‘B (Loop End)’ highlighted, press ENTER at
the point you want the loop to end.
Playback immediately jumps back to the start point and
plays the loop round and round.
• When playing a DVD-Video/Video mode DVD, the
start and end points of the loop must be in the same
title.
4 To resume normal playback, select ‘Off’ from the
A-B Repeat menu.
• You can also press CLEAR to cancel A-B Repeat play
if no menu OSD (such as the Play Mode menu) is
displayed.
Note
• If you switch camera angles while using A-B Repeat
with a DVD-Video disc, A-B repeat is canceled.
Repeat play
There are various repeat play options, depending on the
kind of disc loaded. It’s also possible to use repeat play
together with program play to repeat the tracks/chapters
in the program list (see
Program play below).
1 Select ‘Repeat’ from the Play Mode menu.
2 Select a repeat play mode.
• For VR mode DVD discs, select Repeat Disc , Repeat
Title or Repeat Chapter (or Repeat Off ).
• For DVD-Video and Video mode DVD discs, select
Repeat Title or Repeat Chapter (or Repeat Off ).
• For CDs and Video CD/Super VCDs, select Repeat
Disc or Repeat Track (or Repeat Off ).
• For WMA/MP3 discs, select Repeat Disc , Repeat
Folder or Repeat Track (or Repeat Off ).
3 To resume normal playback, select ‘Repeat Off’
from the Repeat Play menu.
• You can also press CLEAR to cancel repeat play if no
menu OSD (such as the Play Mode menu) is
displayed.
Note
• If you switch the camera angle during repeat play of
a DVD-Video disc, repeat play is canceled.
• If there is a program list, you can also select Repeat
Program to repeat the program list.
Program play
This feature lets you program the play order of titles/
chapters/folders/tracks on a disc.
1 Select ‘Program’ from the Play Mode menu.
2 Select ‘Input/Edit Program’ from the list of
program options.
The Program edit screen that appears depends on the
kind of disc loaded.
On the left side is the program list, then to the right is a
list of titles (DVD), folders (WMA/MP3), or tracks (CD,
Video CD/Super VCDs). On the far right is a list of
chapters (DVD) or tracks (WMA/MP3).
Search Mode
A-B Repeat
Repeat
Program A (Loop Start)
B (Loop End)
Off
Play Mode
ALL
Search Mode
A-B Repeat
Repeat
Program Repeat Disc
Repeat Title
Repeat Chapter
Repeat Off
Play Mode
VR mode
DVD-Video Video mode
CD Video CD Super VCD
WMA/MP3
DVD-Video CD Video CD Super VCD WMA/MP3
Search Mode
A-B Repeat
Repeat
Program Input/Edit Program
Start Program Play
Cancel Program Play
Erase Program List
Play Mode
DVR-04_UK.book 40 ページ ２００４年４月１１日 日曜日 午後５時２０分