Pioneer DVR-220 - Manual (Page 76)

The Video/Audio Adjust menu 11
76
En
Note
• The Black Setup setting applies only when playing
NTSC discs.
Audio DRC
• Default setting: Off
When watching Dolby Digital material at low volume, it’s
easy to lose low level sounds completely—including
some of the dialog. Switching on Audio DRC (Dynamic
Range Control) can help by bringing up the low level
sounds, while controlling high level peaks.
1 During playback or when paused, press HOME
MENU and select ‘Video/Audio Adjust’.
2 Select ‘Audio Adjust’.
3 Use the / (cursor left/right) buttons to adjust
DRC from ‘Off‘ to ‘Max’.
Exactly how much difference you can hear between the
settings will depend on the material.
Remember
• Audio DRC is not effective when listening to a disc via
the digital output when Dolby Digital Out is set to
Dolby Digital . In this case adjust the dynamic range
from your AV amplifier/receiver.
Off Max Audio DRC
Audio Adjust
DVR-04_UK.book 76 ページ ２００４年４月１１日 日曜日 午後５時２０分