Pioneer DVR-220 - Manual (Page 92)

Additional information 13
92
En
Chapter 13
Additional information
Resetting the recorder
If you need to, you can reset the recorder to all its factory
settings.
1 Make sure that the recorder is on.
2 Press and hold STOP and press STANDBY/
ON.
The recorder turns off with all settings reset.
Setting up the remote to control your
TV
You can use the supplied remote to control your TV. To be
able to use this feature you first have to program the
remote with a maker code from the table below.
1 Press and hold down the CLEAR button, then
enter the maker code for your TV.
The LED indicator on the remote controls lights.
See the table below for the list of maker codes. If there is
more than one code given for your make, input the first
one in the list.
• If the maker’s name of your TV doesn’t appear in the
table below, you will not be able to use this remote to
control your TV.
2 Press TV to check that the remote works with
your TV.
If the remote is set up correctly, the TV should switch on/
off. If it doesn’t and there is another code given for your
maker, repeat step
1 with a new code.
Using the TV remote control buttons
The table below shows how to use this remote control
with your TV.
Button What it does
TV Press to switch the TV on/off (standby)
INPUT SELECT Press to change the TV’s video input
TV VOLUME Use to adjust the TV volume
TV CHANNEL Use to change TV channels
Maker Code
Alba 66
Bush 76
Finlux 84
Fisher 61, 65
Fujitsu 77
Funai 67
Goldstar 79
Grandiente 87
Grundig 51, 82
Hitachi 56, 60, 83, 86
ITT 70
Mitsubishi 59
Nokia 53, 81
Panasonic 58, 72
Philips 57, 85
Pioneer 50, 80
RCA 68
Salora 71
Samsung 73, 75
Sanyo 74
Sei 78
Sharp 52
Sony 54
Tandy 69
Telefunken 64
Thomson 62
Toshiba 55
Victor 63
DVR-04_UK.book 92 ページ ２００４年４月１１日 日曜日 午後５時２０分