Pioneer DVR-220 - Manual (Page 78)

The Initial Setup menu 12
78
En
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
Use the / (cursor up/down) buttons to change
the value in the highlighted field.
Use the
/
(cursor left/right) buttons to move
from one field to another.
Input Line System
• Default setting: 625System
For standard PAL or SECAM recording, leave the input
line system to
625System . When recording an NTSC or
PAL–60 signal through an external input, change to
525System .
Note
• When the current input is a built-in tuner channel
preset, changing the input line system will usually
also affect the input line system of the
AV2/AUTO
START REC (INPUT 1/DECODER) input. However if
the AV2/L1 In setting is set to Decoder (see AV2/L1
In on page 82), then the L2 input is affected instead.
• If when this setting is changed, the screen goes
blank (due to incompatibility with your TV), you can
switch back by pressing and holding the front panel
+ button then pressing DISC NAVIGATOR (also front
panel) while the recorder is stopped.
• You can’t mix recordings of different TV line systems
on the same disc.
• When you change this setting, the Input Colour
System setting also changes (see Input Colour
System on page 82).
On Screen Display
• Default setting: On
On the default setting, the recorder shows on-screen
operation displays (
Play, Stop and so on). Change to Off
to hide these displays.
Front Panel Display
• Default setting: On
On the default setting, the time is shown in the front
panel display when the recorder is in standby. Switch to
Off to have the front panel display switch off completely
when in standby.
Note
• When set to Off , the display still lights dimly in
standby when setting a timer recording, or during
Auto Start Recording.
Power Save
• Default setting: Off
When set to Off , signals arriving at the ANTENNA IN
terminal and at the AV2/AUTO START REC (INPUT 1/
DECODER) AV connector are passed through to the
ANTENNA OUT terminal and to the AV1(RGB)-TV AV
connector, respectively, when the recorder is in standby.
You can cut the standby power consumption of the
recorder by turning off the through function for one or
both terminals:
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Setting
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator Clock Setting Manual Clock Setting 2 /2
Date
Time
Time Zone
Summer Time
01 01 2004 THU
00 00
England
London
On
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Setting
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator 525System
625System
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Setting
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Setting
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Clock Setting
Input Line System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator Mode1
Mode2
Off
Initial Setup
DVR-04_UK.book 78 ページ ２００４年４月１１日 日曜日 午後５時２０分