Recording 06 – Pioneer DVR-220 User Manual

Page 51

Advertising
background image

Recording

06

51

En

• Use the

and

buttons to switch VPS/PDC

On

or

Off

.

2

After making the settings, press ENTER.

The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.

• If you haven’t set up the guide channels (or at least

the guide channel for the PlusCode programming
number that you entered), the recorder will prompt
you to enter the channel number that the TV program
is showing on.

Tip

• You can check the timer program settings by

pressing

TIMER REC

to display the timer recording

screen.

VIDEO Plus+ programming with the power
off

You can enter a PlusCode programming number when
the recorder is in standby.

Important

• You can’t use this feature until you have set up the

guide channels. See

Set VIDEO Plus+ CH

on page 81.

• You can’t change the recording mode.

• You can’t program daily or weekly timer recordings.

1

Press ’VIDEO Plus+’.

The front panel display shows the current recording
mode and prompts you to enter the PlusCode
programming number.

2

Use the number buttons to enter the PlusCode

programming number.

• To clear the last digit entered, press

CLEAR

.

• Use the

PREV

/

NEXT

button to switch VPS/

PDC on/off. With VPS/PDC on, the front panel VPS/
PDC indicator lights. (Note that a maximum of 8
timer recordings can be set with VPS/PDC on.)

3

Press ENTER.

The display shows the timer settings:
Date

Start time

End time

Recording channel.

• If

CODE ERROR

appears in the display, check that

the PlusCode programming number is correct and
that the guide channel is set (see

Set VIDEO Plus+

CH

on page 81), then set the timer recording again.

• If

CAN’T SET

appears in the display, it means that

although you entered a valid PlusCode programming
number, the program has already finished.

Extending a timer recording in progress

You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.

ENTER

CLEAR

PREV

NEXT

ì

VIDEO Plus+

P L US CODE

2 9 32 4

HOME
MENU

ENTER

CLEAR

REC

PREV

NEXT

STOP REC

TIMER REC

ì

DVR-04_UK.book 51 ページ 2004年4月11日 日曜日 午後5時20分

Advertising
This manual is related to the following products: