Panasonic AJ-D92P - Manual (Page 25)

25
Recording
3. Setting the audio inputs
Selecting the audio input signals
The audio signals to be supplied to the unit are
selected using the audio input selector switch.
O
To select the audio signals to be supplied to the
AUDIO IN connector, set this switch to the LINE
position.
O
To select the audio signals to be supplied to the
CAMERA connector, set this switch to the CAM
position.
Adjusting the recording level
The audio levels of the audio signals supplied to the
unit can be adjusted and the signals recorded at those
levels.
Audio input selector switch
CAMERA connector AUDIO IN connector
Select the audio input level selector switch to a
setting (–60 dBu or +4 dBu) that corresponds
with the input level.
2
Set the unit’s POWER switch to ON, and insert
a cassette tape on which signals can be
recorded.
The level meter now appears on the signal level
display window.
1
Set the UNI/VAR switch for the audio channel
to be adjusted to the UNI position.
The audio input level is displayed as it stands.
3
Set the UNI/VAR switch for the audio channel
to be adjusted to the VAR position.
4
While monitoring the level meter, adjust the
recording levels using the recording level
controls.
5
Using the emphasis function
Emphasis can be added to the input signals and the
signals recorded with emphasis by means of the setup
menu item No. 704 setting.
appears on the audio level display when
emphasis has been added to the input signals.
EMPHASIS
2
1
(3)
3 4•5
6