Key setting, Part v composer – Panasonic SX-KN7000 User Manual
Page 111
• To assign a name to each VARIATION, press
the VARIATION button and select a number.
3.
On the RECORD MEMORY display, press the
OK button.
• The display looks similar to the following.
4.
Press the CLEAR THE ENTIRE PATTERN
button.
• The display looks similar to the following.
5.
Press the YES button.
• All the data for the selected pattern is erased.
6.
Use the MEASURE
∧
and
∨
buttons to specify
the number of measures in your new rhythm
pattern (1 to 16).
7
Use the TIME SIGNATURE
∧
and
∨
buttons
to specify the meter of the pattern (1/4 to 8/4).
• When the settings for the MEASURE and
TIME SIGNATURE of the INTRO or ENDING
patterns are changed, the Maj and Min settings
change at the same time.
8.
Press the OK button.
KEY SETTING
Set the key and chord in which you wish the re-
corded pattern to be played. If the recorded per-
formance is played in a key or chord different
from this setting, the automatic accompaniment
will not be able to distinguish the correct chord.
1.
On the RECORDING display press the KEY
SETTING button.
• The display looks similar to the following.
2.
Use the KEY
∧
and
∨
buttons to set the key.
Use the CHORD
∧
and
∨
buttons to set the
chord type (Maj/Min).
3.
When you have finished making the settings,
press the EXIT button.
Co
m
p
o
s
e
r
Part V
Composer
111
QQTG0671