Panasonic SX-KN7000 - Manual (Page 159)

Master Tuning
This setting is used to fine-tune the pitch of the entire instrument. This is convenient when the Keyboard
is played with other instruments or with a recorded performance.
1. On the SOUND MENU display, select
MASTER TUNING.
• The display changes to the following.
2. Use the
∧
and
∨
buttons to adjust the pitch.
Key Scaling
For each part you can change the tuning of each key within a one-octave range. In addition to equal
temperament tuning, you can perform in other types of scales, for example Arabic tuning.
1. On the SOUND MENU display, select KEY
SCALING.
• The display looks similar to the following.
2. Press the OCTAVE TUNING TEMPLATE but-
ton.
• The display looks similar to the following.
3. Use the PART
∧
and
∨
buttons to select the
part to set.
• If ALL is selected, all the parts are set at once.
4. Use the TYPE
∧
and
∨
buttons to select the
type of tuning.
• Select from FLAT, WERCKMEISTER, KIRN-
BERGER, ARABIC 1 to 5, SLENDRO, and
PELOG.
5. Use the SHIFT
∧
and
∨
buttons to select the
key to perform in.
6. Repeat steps 3 to 6 for each part, as neces-
sary.
7. Press the SET button.
• The OCTAVE TUNING for the specified type
and key is automatically set.
Settings for each key.
On the KEY SCALING display, you can adjust
the tuning for each key.
Use the buttons below the display to adjust the
tuning for each key.
• The pitch can be raised or lowered by a max-
imum of one half-tone.
• You can use the PART SELECT ∧
and
∨
buttons to switch the part.
• Use the ALL PARTS INITIAL button to return
all parts to the flat tuning.
So
u
n
d
Part VIII Sound
159
QQTG0671