Panasonic SX-KN7000 - Manual (Page 175)

Effect Edit
These are settings related to the various effects applied to your edited sound.
EFFECT
1. On the SOUND EDIT menu display, select
EFFECT.
• The display looks similar to the following.
2. Use the respective SOUND DSP
∧
and
∨
buttons to specify the effect type and how the
SOUND DSP is applied.
3. Use the respective CHORUS
∧
and
∨
buttons
to specify how the CHORUS is applied.
4. Use the REVERB ADJUST
∧
and
∨
buttons
to specify how the REVERB is applied.
5. Use the MONO/POLY
∧
and
∨
buttons to
select the sound output mode.
6. MONO: Use the PORTAMENTO ON/OFF but-
tons set portamento to on or off. Use the TIME
∧
and
∨
buttons to set the portamento time.
DIGITAL EFFECT
1. Use the PAGE buttons to view the 2/2 display.
• The display looks similar to the following.
• The display for the effect type which is best-
suited for the sound currently being edited is
selected.
2. Use the TYPE
∧
and
∨
buttons to select the
type of effect.
<ON/OFF button>
Specify whether the DIGITAL EFFECT button
turns on or off when the sound is selected.
When set to ON, the DIGITAL EFFECT button
turns on automatically when the sound is
selected.
<STEREO/MONO button>
Select stereo (STEREO) or monaural (MONO)
output of the effect.
3. Use the buttons along the bottom of the display
to select the attribute you wish to adjust.
• When the type is changed, the parameters
revert to the factory defaults.
S
o
un
d E
d
it
Part X Sound Edit
175
QQTG0671