Panasonic SX-KN7000 - Manual (Page 182)

Home Page Setting
Arrange the contents of the normal display to suit your tastes.
1. On the CUSTOMIZE MENU display, select
HOMEPAGE.
• The display looks similar to the following.
2. Use the TYPE
∧
and
∨
buttons to select a
type.
• Select from the following types.
DEFAULT:
The initialized settings.
DEFAULT WITH PICTURE:
Bitmap data that you downloaded with PIC-
TURE LOAD can be positioned in the
middle of your screen.
PRESET 1– 3:
Preset types.
USER:
Made with the USER EDIT function.
• The selected type is previewed in the middle
of the display.
3. Press the OK button.
PICTURE LOAD
Download selected bitmap (.BMP) data.
1. Insert a disk with the desired bitmap data into
the disk drive.
2. Press the PICTURE LOAD button.
3. Select the .BMP file you wish to load.
4. Press the LOAD button.
• The bitmap file is downloaded, and the display
returns to the HOMEPAGE setting display.
• To return to the initialized bitmap data, press
the PICTURE INITIAL button.
• Bitmap data of 2, 16 or 256 colors and 160 ×
100 pixels can be loaded.
• In some cases the data may not load correctly,
depending on the software with which it was
created.
USER EDIT
By arranging the various display parts, you can
create your own USER type display.
1. Press the USER EDIT button.
• The display looks similar to the following.
2. Use the ITEM
∧
and
∨
buttons to select the
part you wish to position.
3. While looking at the preview display, use the
CURSOR button to specify a location.
4. Press the SET button to set the part at the
specified location.
• If you select a part which has already been
positioned, you can press the CLEAR button
to delete it.
5. Repeat steps 2 and 4 to create your display.
6. Press the WRITE button.
Cu
s
to
m
iz
e
Part XII Customize
182
QQTG0671