Pinnacle Design Pinnacle Systems Media Stream Media Gateway 37T100105 - Manual (Page 32)

Chapter 3: Installation and Setup
32 MMG Installation, Setup, and Operations Guide
Notice that all of the columns show Stereo as the logical bus. To create an additional logical
output bus, click on the text “Stereo”, choose add new logical output bus, and choose Stereo
(Figure 3-28).
Figure 3-28: Stereo Setting
The column now shows Stereo(2). Repeat these steps until you have the number of audio pairs
desired. Figure 3-29 shows an audio setup with four logical busses configured. Notice that the
logical bus called Stereo(2) corresponds to the sound clips placed on the timeline Name2, the
logical bus Stereo(3) corresponds to the sound clips on the timeline Name3, and so on.
Figure 3-29: ,Four Logical Output Busses