Pinnacle Design Pinnacle Systems Media Stream Media Gateway 37T100105 - Manual (Page 58)

Chapter 4: Workflow and File Transfer
58 MMG Installation, Setup, and Operations Guide
Using XSend
After editing a sequence, you can use XSend to send the finished clip back to the SAN. The
timeline is fused to a single clip that the MediaStream can play out.
Important: Make sure the timeline is configured to the format you wish to use. Timeline Codec
Setup is described in detail in Setting up Blue Codecs on page 34.
Determine the name of the sequence you want to send. The name of the sequence appears above
the inlay (Figure 4-13).
Figure 4-13: Sequence Name
Locate this sequence in the sequences rack.
Figure 4-14: Sequence Rack
Right click the sequence and choose XSend To->XSend to MSS.
Figure 4-15: XSend menu