Promise Technology SMARTSTOR NS4300N - Manual (Page 132)

SmartStor NS4300N Product Manual
122
Setting up Macintosh Access
Setting up Macintosh Service
To set up access from a Macintosh PC:
1. In the Tree, click the + beside the File & Print icon.
2. Click the Protocol Control icon, then click the Macintosh tab.
3. Click the Enable button.
4. Optional. Type a message in the Login Message field.
5. Click the OK button to save your settings.
The optional login message appears on the Welcome screen when you log
into SmartStor from a Macintosh PC.
Setting up File Sharing
To set up Macintosh file sharing:
1. In the Tree, click the Sharing Setup icon, then click the Windows/
Macintosh/FTP Sharing tab.
2. Check the Macintosh protocol box.
3. Choose a folder from the Folder Name dropdown menu.
4. In the User/Group list, highlight the name of a user or group.
Group names are preceded by the @ character.
5. Under Permissions, choose a permission level for this user or group:
• Deny Access – Visible only, cannot open
• Read Only
• Read and Write – Default
6. Click the OK button to save your settings.
7. In the confirmation box, click the OK button.
You can now access the specified folder from a Macintosh PC.
See “Chapter 3: Connecting to the SmartStor” on page 27 for information
about the settings that you must make on your Macintosh PC.
Login Message