Promise Technology SMARTSTOR NS4300N - Manual (Page 158)

SmartStor NS4300N Product Manual
148
Running the Network Time Protocol
You can use the Network Time Protocol (NTP) to set the system date and time
on your SmartStor to synchronize itself with an external Time Server.
To run the Network Time Protocol:
1. In the Tree, click the + beside the System icon.
2. Click the Date / Time icon.
3. Click the Time Zone tab.
4. From the dropdown menu, choose the time zone for your location.
5. Click the OK button.
6. Click the NTP tab.
7. In the Time Server field, type the URL of the time server you want to use.
URL time.nist.gov is the default.
8. Under Schedule, choose one of the options:
• Disable – Disables NTP synchronization
• Do it at once – Performs a synchronization when you click the OK
button.
• Time interval by hour – Set an hourly interval for a synchronization to
happen.
• Daily – Sets the time of day when the synchronization happens.
• Weekly – Sets the time of day and day of the week when the
synchronization happens.
9. Click the OK button.
10. In the confirmation box, click the OK button.
Viewing the Results of NTP Synchronization
To view the results of an NTP synchronization:
1. In the Tree, click the + beside the System icon.
2. Click the Date / Time icon.
3. Click the NTP tab.
The results of the latest synchronization are displayed:
• Last Synchronization Time – Time and date of the last
synchronization
• Last Synchronization Result – OK means success